README

Shell scripts to manage database backups, asset backups, file permissions, asset syncing, cache clearing, and database syncing between Craft CMS environments

Overview

There are several scripts included in craft-scripts, each of which perform different functions. They all use a shared .env.sh to function. This .env.sh should be created on each environment where you wish to run the craft-scripts, and it should be excluded from your git repo via .gitignore.

Craft-Scripts works with both Craft 2.x & Craft 3.x, and has built-in support for both mysql as well as postgres databases.

Installation

Copy the scripts folder into the root directory of your Craft CMS project
Duplicate the example.env.sh file, and rename it to .env.sh
Add .env.sh to your .gitignore file
Then open up the .env.sh file into your favorite editor, and replace REPLACE_ME with the appropriate settings.

Upgrading

To upgrade to a later version of Craft-Scripts, replace the contents of your scripts folder with the newest Craft-Scripts, while preserving your existing .env.sh file.

Craft-Scripts comes with defaults so that even older .env.sh files should work with the latest Craft-Scripts.

set_perms.sh

The set_perms.sh script sets the Craft CMS install file permissions in a strict manner, to assist in hardening Craft CMS installs.

See Hardening Craft CMS Permissions for a detailed writeup.

Note: if you use git, please see the Permissions and Git section below.

clear_caches.sh

The clear_caches.sh script clears the Craft CMS caches by removing all of the craft/storage/runtime/ cache dirs, as well as emptying the craft_templatecaches db table.

It can also clear Redis db caches if LOCAL_REDIS_DB_ID is set, and it can clear FastCGI Cache if LOCAL_FASTCGI_CACHE_DIR is set.

If you want to add this to your Forge / DeployBot / Buddy.works deploy script so that caches are auto-cleared on deploy, set up the .env.sh on your remote server(s) and then add this to your deploy script:

scripts/clear_caches.sh

The above assumes that the current working directory is the project root already.

pull_db.sh

The pull_db.sh script pulls down a database dump from a remote server, and then dumps it into your local database. It backs up your local database before doing the dump.

The db dumps that craft-scripts does will exclude tables that are temporary/cache tables that we don't want in our backups/restores, such as the templatecaches table.

See Database & Asset Syncing Between Environments in Craft CMS for a detailed writeup.

N.B.: The pull_db.sh script can be used even if the local and remote are on the same server.

pull_assets.sh

The pull_assets.sh script pulls down an arbitrary number of asset directories from a remote server, since we keep client-uploadable assets out of the git repo. The directories it will pull down are specified in LOCAL_ASSETS_DIRS

It will also pull down the Craft userphotos and rebrand directories from craft/storage by default. The directories it will pull down are specified in LOCAL_CRAFT_FILE_DIRS

See Database & Asset Syncing Between Environments in Craft CMS for a detailed writeup.

N.B.: The pull_assets.sh script can be used even if the local and remote are on the same server.

pull_backups.sh

The pull_backups.sh script pulls down the backups created by craft-scripts from a remote server, and synced into the LOCAL_BACKUPS_PATH

For database backups, a sub-directory REMOTE_DB_NAME/db inside the REMOTE_BACKUPS_PATH directory is used for the database backups.

For asset backups, a sub-directory REMOTE_DB_NAME/assets inside the REMOTE_BACKUPS_PATH directory is used for the asset backups.

Because rsync is used for these backups, you can put a .rsync-filter in any directory to define files/folders to ignore. More info

See Mitigating Disaster via Website Backups for a detailed writeup.

sync_backups_to_s3.sh

The sync_backups_to_s3.sh script syncs the backups from LOCAL_BACKUPS_PATH to the Amazon S3 bucket specified in REMOTE_S3_BUCKET.

If you have defined a optional subfolder, it will contain the backups to the path defined in REMOTE_S3_PATH.

This script assumes that you have already installed awscli and have configured it with your credentials.

It's recommended that you set up a separate user with access to only S3, and set up a private S3 bucket for your backups.

You can set LOCAL_AWS_PROFILE to determine which AWS profile to connect with.

See Mitigating Disaster via Website Backups for a detailed writeup.

backup_db.sh

The backup_db.sh script backs up the local database into a timestamped, gzip compressed archive into the directory set via LOCAL_BACKUPS_PATH. It will also automatically rotate out (delete) any backups that are older than GLOBAL_DB_BACKUPS_MAX_AGE old.

The database backups exclude temporary/cache tables, and are stored in the sub-directory LOCAL_DB_NAME/db, inside of LOCAL_BACKUPS_PATH.

The numbers at the end of the backup archive are a timestamp in the format of YYYYMMDD-HHMMSS.

See the Automated Script Execution section below for details on how to run this automatically

See Mitigating Disaster via Website Backups for a detailed writeup.

backup_assets.sh

The backup_assets.sh script backs up an arbitrary number of asset directories to the directory specified in LOCAL_BACKUPS_PATH. The directories it backs are up specified in LOCAL_ASSETS_DIRS, just as they were for the pull_assets.sh script.

It will also back up the Craft userphotos and rebrand directories from craft/storage by default. The directories it will backup are specified in LOCAL_CRAFT_FILE_DIRS

Because rsync is used for these backups, you can put a .rsync-filter in any directory to define files/folders to ignore. More info

For example, if you don't want any Craft image transforms backed up, your .rsync-filter file in each assets directory might look like this:

# This file allows you to add filter rules to rsync, one per line, preceded by either
# `-` or `exclude` and then a pattern to exclude, or `+` or `include` and then a pattern
# to include. More info: http://askubuntu.com/questions/291322/how-to-exclude-files-in-rsync
- _*/**

See the Automated Script Execution section below for details on how to run this automatically

See Mitigating Disaster via Website Backups for a detailed writeup.

backup_dirs.sh

The backup_dirs.sh script backs up an arbitrary number of directories to the directory specified in LOCAL_BACKUPS_PATH. The directories it backs are up specified in LOCAL_DIRS_TO_BACKUP.

This script is provided in case you have other files outside of your project that need backing up. For example, you might have a separate wiki or directory of config files.

Because rsync is used for these backups, you can put a .rsync-filter in any directory to define files/folders to ignore. More info

For example, if you have a wiki with data/cache and data/tmp directories that you don't want backed up, your .rsync-filter file in the wiki directory might look like this:

# This file allows you to add filter rules to rsync, one per line, preceded by either
# `-` or `exclude` and then a pattern to exclude, or `+` or `include` and then a pattern
# to include. More info: http://askubuntu.com/questions/291322/how-to-exclude-files-in-rsync
- public/data/cache
- public/data/tmp

See the Automated Script Execution section below for details on how to run this automatically

See Mitigating Disaster via Website Backups for a detailed writeup.

restore_db.sh

The restore_db.sh restores the local database to the database dumb passed in via command line argument. It backs up your local database before doing the restore.

You can pass in either a path to a .sql file or .gz file to restore_db.sh, and it will do the right thing based on the file type.

See Mitigating Disaster via Website Backups for a detailed writeup.

restore_assets.sh

The restore_assets.sh restores the assets from the backup that has been created with backup_assets.sh.

restore_dirs.sh

The restore_dirs.sh restores the dirs from the backup that has been created with backup_dirs.sh.

Setting it up

Download or clone the craft-scripts git repo
Copy the scripts directory into the root directory of your Craft CMS project
In the scripts directory, duplicate the craft2-example.env.sh (for Craft 2.x projects) or craft3-example.env.sh (for Craft 3.x projects) file, and rename it to .env.sh. These *-example.env.sh files are largely the same, just with some different defaults for Craft 2.x and Craft 3.x.
Add .env.sh to your .gitignore file
Then open up the .env.sh file into your favorite editor, and replace REPLACE_ME with the appropriate settings.

All configuration is done in the .env.sh file, rather than in the scripts themselves. This is is so that the same scripts can be used in multiple environments such as local dev, staging, and live production without modification. Just create a .env.sh file in each environment, and keep it out of your git repo via .gitignore.

Global Settings

All settings that are prefaced with GLOBAL_ apply to all environments.

GLOBAL_DB_TABLE_PREFIX is the Craft database table prefix, usually craft_

GLOBAL_CRAFT_PATH is the path of the craft folder, relative to the root path. This should normally be craft/, unless you have moved it elsewhere. Paths should always have a trailing /

GLOBAL_DB_BACKUPS_MAX_AGE Is the maximum age of local backups in days; backups older than this will be automatically rotated out (removed).

GLOBAL_DB_DRIVER is the database driver for this Craft install (mysql or pgsql)

Local Settings

All settings that are prefaced with LOCAL_ refer to the local environment where the script will be run, not your local dev environment.

LOCAL_ROOT_PATH is the absolute path to the root of your local Craft install, with a trailing / after it.

LOCAL_ASSETS_PATH is the relative path to your local assets directories, with a trailing / after it.

LOCAL_CHOWN_USER is the user that is the owner of your entire Craft install.

LOCAL_CHOWN_GROUP is your webserver's group, usually either nginx or apache.

LOCAL_WRITEABLE_DIRS is a quoted list of directories relative to LOCAL_ROOT_PATH that should be writeable by your webserver.

LOCAL_ASSETS_DIRS is a quoted list of asset directories relative to LOCAL_ASSETS_PATH that you want to pull down from the remote server. It's done this way in case you wish to sync some asset directories, but not others. If you want to pull down all asset directories in LOCAL_ASSETS_PATH, just leave one blank quoted string in this array

LOCAL_CRAFT_FILE_DIRS is a quoted list of Craft file directories relative to LOCAL_CRAFT_FILES_PATH that you want to pull down from the remote server. By default, it will pull down the userphotos and rebrand directories in craft/storage, which typically are not kept in git. If you don't want it to sync anything, just leave the setting empty, e.g.: LOCAL_CRAFT_FILE_DIRS=()

LOCAL_DIRS_TO_BACKUP is an array of bsolute paths to directories to back up, in addition to LOCAL_ASSETS_DIRS and LOCAL_CRAFT_FILE_DIRS

LOCAL_FASTCGI_CACHE_DIR is the local FastCGI Cache path; leave it empty ("") if you're not using FastCGI Cache; paths should always have a trailing /. The clear_caches.sh script will delete everything in this directory when it is executed (say, on deploy)

LOCAL_REDIS_DB_ID is the local Redis database ID; leave it empty ("") if you're not using Redis. The clear_caches.sh script will purge this Redis database when it is executed (say, on deploy)

LOCAL_DB_NAME is the name of the local mysql Craft CMS database

LOCAL_DB_PASSWORD is the password for the local mysql Craft CMS database

LOCAL_DB_USER is the user for the local mysql Craft CMS database

LOCAL_DB_HOST is the host name of the local mysql database host. This is normally localhost

LOCAL_DB_PORT is the port number of the local mysql database host. This is normally 3306 for mysql, and 5432 for postgres.

LOCAL_MYSQL_CMD is the command for the local mysql executable, normally just mysql. It is provided because some setups like MAMP require a full path to a copy of mysql inside of the application bundle.

LOCAL_MYSQLDUMP_CMD is the command for the local mysqldump executable, normally just mysqldump. It is provided because some setups like MAMP require a full path to a copy of mysqldump inside of the application bundle.

LOCAL_PSQL_CMD is the command for the local postgres executable, normally just psql.

LOCAL_PG_DUMP_CMD is the command for the local pg_dump executable, normally just pg_dump.

LOCAL_DB_LOGIN_PATH if this is set, it will use --login-path= for your local db credentials instead of sending them in via the commandline (see below)

LOCAL_BACKUPS_PATH is the absolute path to the directory where local backups should be stored. For database backups, a sub-directory LOCAL_DB_NAME/db will be created inside the LOCAL_BACKUPS_PATH directory to store the database backups. Paths should always have a trailing /

LOCAL_AWS_PROFILE is an AWS named profile you can set to determine which profile to connect to S3 with.

Using mysql within a local docker container

LOCAL_MYSQL_CMD which is normally just mysql, is prepended with docker exec -i CONTAINER_NAME to execute the command within the container. (Example: docker exec -i container_mysql_1 mysql)

LOCAL_MYSQLDUMP_CMD which is normally just mysqldump, is prepended with docker exec CONTAINER_NAME to execute the command within the container. (Example: docker exec container_mysql_1 mysqldump)

Remote Settings

All settings that are prefaced with REMOTE_ refer to the remote environment where assets and the database will be pulled from.

REMOTE_SSH_LOGIN is your ssh login to the remote server, e.g.: user@domain.com

REMOTE_SSH_PORT is the port to use for ssh on the remote server. This is normally 22

REMOTE_DB_USING_SSH determines whether the database connection needs to be done over ssh, or the database should be directly connected to (such as for Heroku or Amazon RDS services). This is normally yes

REMOTE_ROOT_PATH is the absolute path to the root of your Craft install on the remote server, with a trailing / after it.

REMOTE_ASSETS_PATH is the relative path to the remote assets directories, with a trailing / after it.

REMOTE_DB_NAME is the name of the remote mysql Craft CMS database

REMOTE_DB_PASSWORD is the password for the remote mysql Craft CMS database

REMOTE_DB_USER is the user for the remote mysql Craft CMS database

REMOTE_DB_HOST is the host name of the remote mysql database host. This is normally localhost

REMOTE_DB_PORT is the port number of the remote mysql database host. This is normally 3306 for mysql, and 5432 for postgres.

REMOTE_MYSQL_CMD is the command for the local mysql executable, normally just mysql.

REMOTE_MYSQLDUMP_CMD is the command for the local mysqldump executable, normally just mysqldump.

REMOTE_PSQL_CMD is the command for the remote postgres executable, normally just psql.

REMOTE_PG_DUMP_CMD is the command for the remote pg_dump executable, normally just pg_dump.

REMOTE_DB_LOGIN_PATH if this is set, it will use --login-path= for your remote db credentials instead of sending them in via the commandline (see below)

REMOTE_BACKUPS_PATH is the absolute path to the directory where the remote backups are stored. For database backups, a sub-directory REMOTE_DB_NAME/db inside the REMOTE_BACKUPS_PATH directory is used for the database backups. Paths should always have a trailing /

REMOTE_S3_BUCKET is the name of the Amazon S3 bucket to backup to via the sync_backups_to_s3.sh script

REMOTE_S3_PATH is a optional path relative to the Amazon S3 bucket where the sync_backups_to_s3.sh script will contain the backups if specified

Setting up SSH Keys

Normally when you ssh into a remote server (as some of the craft-scripts do), you have to enter your password. Best practices from a security POV is to not allow for password-based logins, but instead use SSH Keys.

The day in, day out benefit of setting up SSH Keys is that you never have to enter your password again, so it allows for automated execution of the various craft-scripts. Use the excellent How To Set Up SSH Keys artice as a guide for setting up your SSH keys.

Permissions and Git

If you use git, a sample .gitignore file that you can modify & use for your Craft CMS projects is included in craft-scripts as example.gitignore. If you wish to use it, the file should be copied to your Craft CMS project root, and renamed .gitignore

If you change file permissions on your remote server, you may encounter git complaining about overwriting existing local changes when you try to deploy. This is because git considers changing the executable flag to be a change in the file, so it thinks you changed the files on your server (and the changes are not checked into your git repo).

To fix this, we just need to tell git to ignore permission changes on the server. You can change the fileMode setting for git on your server, telling it to ignore permission changes of the files on the server:

git config --global core.fileMode false

See the git-config man page for details.

The other way to fix this is to set the permission using set_perms.sh in local dev, and then check the files into your git repo. This will cause them to be saved with the correct permissions in your git repo to begin with.

The downside to the latter approach is that you must have matching user/groups in both local dev and on live production.

Automatic Script Execution

If you want to run any of these scripts automatically at a set schedule, here's how to do it. We'll use the backup_db.sh script as an example, but the same applies to any of the scripts.

Please see the Setting up SSH Keys section and set up your SSH keys before you set up automatic script execution.

On Linux

If you're using Forge you can set the backup_db.sh script to run nightly (or whatever interval you want) via the Scheduler. If you're using ServerPilot.io or are managing the server yourself, just set the backup_db.sh script to run via cron at whatever interval you desire.

craft-scripts includes a crontab-helper.txt that you can add to your crontab to make configuring cron easier. Remember to use full, absolute paths to the scripts when running them via cron, as cron does not have access to your environment paths, e.g.:

/home/forge/nystudio107.com/scripts/backup_db.sh

On a Mac

If you're using a Mac and you want to execute the script locally, Apple uses Launch Daemons instead of cron.

N.B.: Even if you are on a Mac, if you run your local dev in a VM like Vagrant/Homestead, you'll want to execute the craft-scripts from inside of the VM itself, not on your local Mac. If you use something like Valet or Mamp, read on.

Included in craft-scripts is a com.example.launch_daemon.plist to help you get started. This file is an XML file, and the name should be a unique, reverse-DNS-style name suffixed with .plist. This file is analogous to a single line in a crontab file.

Rename com.example.launch_daemon.plist to something unique to your project/script, e.g.: com.clientdomain.backup_db.plist and place it in /Library/LaunchDaemons/ (you'll need to sudo to do this).

The Launch Daemon .plist file is an XML file with a series of <key></key>s followed by some type that is a value for that key. The value for the <key>Label</key> should match the name of the file, minus the .plist extension, e.g.: <string>com.clientdomain.backup_db</string>. The value for the <key>UserName</key> should be the user name that you want the task to run as, e.g.: <string>andrew</string>

The value for the <key>Program</key> is a path to the command to execute, e.g.: <string>/Users/andrew/webdev/sites/nystudio107/scripts/backup_db.sh</string>

Launch Daemons offer any number of ways to schedule when and how they execute; please see the Launch Daemon documentation for details.

Once the file has been created in /Library/LaunchDaemons/, it'll need to be loaded (you only need to do this once) via launchctl, e.g.:

sudo launchctl load /Library/LaunchDaemons/com.clientdomain.backup_db.plist

For more information on configuring Launch Daemons, please see the excellent launchd.info website.

Using login-path with mysql 5.6

If you're using mysql 5.6 or later, you’ll note the warning from mysql (this is not an issue if you’re using MariaDB):

mysql: [Warning] Using a password on the command line interface can be insecure.

What the craft-scripts is doing isn’t any less secure than if you typed it on the command line yourself; everything sent over the wire is always encrypted via ssh. However, you can set up login-path to store your credentials in an encrypted file as per the Passwordless authentication using mysql_config_editor with MySQL 5.6 article.

If you set LOCAL_DB_LOGIN_PATH or REMOTE_DB_LOGIN_PATH it will use --login-path= for your db credentials on the respective environments instead of sending them in via the commandline.

For example, for my local dev setup:

mysql_config_editor set --login-path=localdev --user=homestead --host=localhost --port=3306 --password

...and then enter the password for that user. And then in the .env.sh I set it to:

LOCAL_DB_LOGIN_PATH="localdev"

...and it will use my stored, encrypted credentials instead of passing them in via commandline. You can also set this up on your remote server, and then set it via REMOTE_DB_LOGIN_PATH

Brought to you by nystudio107

nystudio107 / craft-scripts

Maintainers

Details

README

Overview

Installation

Upgrading

set_perms.sh

clear_caches.sh

pull_db.sh

pull_assets.sh

pull_backups.sh

sync_backups_to_s3.sh

backup_db.sh

backup_assets.sh

backup_dirs.sh

restore_db.sh

restore_assets.sh

restore_dirs.sh

Setting it up

Global Settings

Local Settings

Using mysql within a local docker container

Remote Settings

Setting up SSH Keys

Permissions and Git

Automatic Script Execution

On Linux

On a Mac

Using login-path with mysql 5.6