jambagecom/fh-debug

PHP debugger, sys_log and devLog Logger

v0.17.3 2024-11-09 15:21 UTC

Requires

• typo3/cms-core: ^10.4 || ^11.5 || ^12.0 || ^13.0

Suggests

• jambagecom/tsparser: ^0.9

Replaces

• typo3-ter/fh-debug: v0.17.3

GPL-2.0-or-later

• Franz Holzinger

• debug
• error
• syslog
• oops
• TYPO3 CMS
• devlog

README

Installation Requirement

You must overwrite the TYPO3 Core file sysext/core/Resources/PHP/GlobalDebugFunctions.php of a classic installation or the vendor/typo3/cms-core/Resources/PHP/GlobalDebugFunctions.php of a Composer installation by the file fh_debug/Patches/TYPO3/sysext/core/Resources/PHP/GlobalDebugFunctions.php. Alternatively you can use "post-install-cmd" or "post-autoload-dump" and a file copy method in your composer.json. See Defining scripts .

This will bring you back the former methods debugBegin and debugEnd into TYPO3 Core. This also contains the necessary PHP code to call fh_debug if it is activated in the Extension Manager. Only by this file replacement fh_debug will work at all.

What is does

Use this extension to generate debug output files for the PHP code of TYPO3 and TYPO3 extensions in the Front End or Back End if they have PHP debug statements. Consider to also install debug_mysql_db if you want to debug the generated SQL queries or track down the PHP errors in the table sys_log or the Developer traces written to the TYPO3 function devLog.

The debug output is written into a HTML debug output file. All the configuration is done in the Extension Manager for fh_debug. You can design the output by the CSS file fhdebug.css. If you have a lot of debug output then you should put debug (‘B’) (formerly debugBegin()) and debug (‘E’) (formerly debugEnd()) PHP commands around the PHP debug commands in order to have fewer debug output lines in the file. These commands will activate and deactivate the debug output.

force output

Since version 0.8.3: If a debug (‘B’) is required, but maybe not active, then you can use the third parameter (group) ‘F’ to force an output. This is a special case to produce the output no matter if debug (‘B’) is set to be mandatory or not.

example:

debug ('B');
$a = 'myString';
debug ($a, '$a at position 1');
debug ('E');

No debug output will be shown on the screen. Otherwise you must deactivate the debug output in the Install Tool.

$a = 'myString2';
debug ($a, '$a at position 1', 'F');

The debug output will always be shown.

News

Since version 0.15.0 the global error object is initialized automatically if it is not existent. This allows to insert debug calls almost everywhere in the TYPO3 backend even before the Middleware is dispatched.

Configuration

Just enter any invalid IP address:

[SYS][devIPmask] = 1.1.1.1

The Extension Manager configuration of fh_debug will be added to the IP address of the Install Tool. IPADDRESS = 34.22.11.12. Your current IP address is shown in the Extension Manager view of fh_debug below the field IPADDRESS. If your provides has an ip version 6 activated, then you must enter it in the IPv6 format.

example:

Enter your current IP address 11.12.13.14, if you want to debug this client’s actions.

LocalConfiguration.php:

Use the fh_debug error handler in order to get debug messages of all exceptions. Add these lines into your file LocalConfiguration.php under typo3conf.

'SYS' => array(
   'displayErrors' => '2',
    'errorHandler' => 'JambageCom\\FhDebug\\Hooks\\ErrorHandler',
),

You can show more debug info and a backtrace with the TYPO3 error message Oops, an error occurred!. This is activated by default: OOPS_AN_ERROR_OCCURRED = 1. This will also add a detailed debug output to the debug file.

To get the debug output for “Oops, an error occurred!” you must make this configuration in the Install Tool or LocalConfiguration.php:

[SYS][productionExceptionHandler] =

JambageCom\FhDebug\Hooks\CoreProductionExceptionHandler

Remove this settings before you deinstall fh_debug. Otherwise you will get this PHP error entry:

PHP Fatal error: Uncaught Error: Class ‘JambageCom\FhDebug\Hooks\CoreProductionExceptionHandler’ not found in /var/www/html/typo3_src-9.5.8/typo3/sysext/core/Classes/Utility/GeneralUtility.php:3667

The default setting is:

[SYS][productionExceptionHandler] = TYPO3\CMS\Core\Error\ProductionExceptionHandler

example:

if (\TYPO3\CMS\Core\Utility\ExtensionManagementUtility::isLoaded('fh_debug')) {
    require_once(\TYPO3\CMS\Core\Utility\ExtensionManagementUtility::extPath('fh_debug') . 'Classes/Utility/DebugFunctions.php');  // use t3lib_extMgm::extPath in TYPO3 4.5
    // some configuration:
    \JambageCom\Fhdebug\Utility\DebugFunctions::setErrorLogFile(''); // this is necessary if you use the error_log file
    // if you use the debug HTML file:
    \JambageCom\Fhdebug\Utility\DebugFunctions::setDebugFile('fileadmin/debug.html');

    \JambageCom\Fhdebug\Utility\DebugFunctions::setDebugBegin(FALSE);
    \JambageCom\Fhdebug\Utility\DebugFunctions::setRecursiveDepth('12');
    \JambageCom\Fhdebug\Utility\DebugFunctions::setTraceDepth('12');
    \JambageCom\Fhdebug\Utility\DebugFunctions::setAppendDepth('0');
    \JambageCom\Fhdebug\Utility\DebugFunctions::setTypo3Mode('ALL');
    \JambageCom\Fhdebug\Utility\DebugFunctions::setActive(TRUE);
    \JambageCom\Fhdebug\Utility\DebugFunctions::initFile();
}

\JambageCom\Fhdebug\Utility\DebugFunctions::debug ($_EXTCONF, '$_EXTCONF');

If you use the file ext_localconf.php or some of the at first executed TYPO3 core files, then the extension fh_debug has not been initialized yet. Therefore you must use the full namespace class to initialize and to call the class of fh_debug.

Class ‘JambageCom\Fhdebug\Utility\DebugFunctions’ not found in /var/www/html/typo3_src/typo3/sysext/core/Resources/PHP/GlobalDebugFunctions.php line 15

This means that your debug output shall be generated before the extension fh_debug has been initialized by TYPO3. You must do your own initialization by these commands:

example:

require_once(\TYPO3\CMS\Core\Utility\ExtensionManagementUtility::extPath('fh_debug') . 'Classes/Utility/DebugFunctions.php');
\JambageCom\Fhdebug\Utility\DebugFunctions::init();
\JambageCom\Fhdebug\Utility\DebugFunctions::setErrorLogFile('');
\JambageCom\Fhdebug\Utility\DebugFunctions::setDebugFile('fileadmin/debug.html');

debug ($tmp, 'variable before fh_debug has been started yet.');

debug begin and end

There are 2 control commands available to begin and to end the generation of debug output: debug (‘B’) and debug (‘E’), formerly (before TYPO3 9.5) debugBegin() and debugEnd() .

Replacement for the functions debugBegin and debugEnd:

Since fh_debug 0.8.0 a workaround has been introduced because in TYPO3 9 needed global functions have been removed.

example:

debug ('B'); // begin debugging
debug ($myVariable, 'my variable');
debug ('E'); // end debugging

example before version 0.8.0:

debugBegin();
debug ($myVariable, 'my variabled');
debugEnd();

Error

If fh_debug does not work, then there is probably the case where fh_debug has not been activated yet. You can use PHP error logging as an alternative.

example PHP error_log :

error_log('mymethod Position 2 $variableName: ' .  print_r($variableName, true) . PHP_EOL, 3, '/var/www/html/fileadmin/phpDebugErrorLog.txt');

Use you own path as the last parameter of the above method error_log

Trouble shooting

If you do not get anything shown in the browser url https://example.com/fileadmin/debug.html, then make sure that this file debug.html really exists on the file system. If not, then create an empty file debug.html in the folder fileadmin and give Apache write access to it.

Check the configuration in the extension manager. IP addresses of the client browser Put in an asterisk * . Then every client IP address will produce a debug output.

Improvements

Please make an entry directly on the TYPO3 Core bug tracker at add a control function for debugging enhanced debug methods

Global functions can only be implemented in the TYPO3 core.

ToDO

Program a TYPO3 patch extension which overwrites TYPO3 core files.