cirrusidentity/simplesamlphp-module-ratelimit

There is no license information available for the latest version (v3.0.0) of this package.

Ratelimit certain actions, such as username + password login

Maintainers

Details

github.com/cirrusidentity/simplesamlphp-module-ratelimit

Source

Issues

Installs: 17 431

Dependents: 0

Suggesters: 0

Security: 0

Stars: 7

Watchers: 5

Forks: 2

Open Issues: 1

Type:simplesamlphp-module

v3.0.0 2024-05-16 22:37 UTC

Requires

Requires (Dev)

Unknown License 838fabf5e0c07d48131a5bca5f8c2e43bb75d2d1

This package is auto-updated.

Last update: 2024-11-17 01:16:01 UTC

README

Table of Contents generated with DocToc

Overview

This module provides functionality to rate limit aspects of SSP

Installation

  • SSP 2.2: Use v3 (currently at v3.0.0)

  • SSP 2.0 or 2.1: Use v2 (currently at v2.0.0-alpha.1)

  • SSP 1: Use v1 (currently at 1.10)

    composer require cirrusidentity/simplesamlphp-module-ratelimit

Rate Limiting Auth Source

Any authsource that uses username and password (and also extends UserPassBase) can be wrapped with RateLimitUserPass to limit the number of authentication attempts an attacker can make.

Limiters

  • DeviceCookieLimimter: This sets a device cookie on successful authentications. Subsequent authentication attempts for the same user, on the same device will be allowed to proceed. This prevents an attacker from denial of servicing other users.
  • IpLimiter: Allow limiting attempts by IP address. Allows white listing IPs and subnets to exclude
  • PasswordStuffLimiter: Limits the amount of attempts an incorrect password can be used. Used to prevent password stuffing attacks where an attacker uses the same password but varies the username
  • UsernameLimiter: Limits the amount of attempts by username.

Configuration

All included limiters support these 2 settings:

  • limit: (int)The number of failed attempts before limiter takes affect
  • window: (string) An ISO8601 duration string for the time window to track limit. Example: PT5M would be 5 minutes. P14D would be 14 days.

Configuration should be done in authsources.php. The RateLimitUserPass authsource wraps other auth sources to enforce the rate limits. Each of your existing authsource definitions should get moved inside the 'delegate' key.

limiters are run in the order defined, and not in numerical order of the keys.

Sample Configuration

Standalone delegate/SSP 2 style configuration

In SSP v2, on the IdP side, an attacker cannot invoke an authsource directly. This allows you to define the rate limit authsource and have it reference another one in the config file.

$config = [

//  Sample authsource prior to using rate limiting
   'sample' => [
       'ldap:Ldap',
       //Other ldap:LDAP options
   ],

// Sample authsource after moving to rate limiting
     'sample-ratelimit' => [  // Authsource name stays the same
        'ratelimit:RateLimitUserPass',
         'delegate' => 'sample',
         'ratelimit' => [
               0 => [
                    'device',
                    'window' => 'P28D',
                    'limit' => 10,
               ],
               1 => [
                    'user',
                    'window' => 'PT5M',
                    'limit' => 20
               ],
               2 => [
                    'password',
                    'window' => 'PT5M',
                    'limit' => 20
               ],
               3 => [
                    'ip',
                    'window' => 'PT5M',
                    'limit' => 100,
                    'whitelist' => [
                       '1.2.3.4',
                       '5.6.7.0/24',
                    ],
               ],
          ],
     ]
];

Embedded delegate/SSP 1.x style configuration

In SSP 1.x there was no way to hide an authsource from someone invoking it directly through the test authsources functionality. This meant to truly rate limit an authsource you had to hide its configuration inside the ratelimit authsource.

$config = [

//  Sample authsource prior to using rate limiting
//    'sample' => [
//        'ldap:Ldap',
//         //Other ldap:LDAP options
//     ],

// Sample authsource after moving to rate limiting
     'sample' => [  // Authsource name stays the same
        'ratelimit:RateLimitUserPass',
         'delegate' => [  // Previous authsource configuration for 'sample' moves here
            'ldap:Ldap',
            //Other ldap:LDAP options
         ],
         'ratelimit' => [
               0 => [
                    'device',
                    'window' => 'P28D',
                    'limit' => 10,
               ],
               1 => [
                    'user',
                    'window' => 'PT5M',
                    'limit' => 20
               ],
               2 => [
                    'password',
                    'window' => 'PT5M',
                    'limit' => 20
               ],
               3 => [
                    'ip',
                    'window' => 'PT5M',
                    'limit' => 100,
                    'whitelist' => [
                       '1.2.3.4',
                       '5.6.7.0/24',
                    ],
               ],
          ],
     ]
 ];

If no ratelimit block is defined then the UsernameLimiter and DeviceCookieLimiter are automatically enabled.

Blocking behavior

When a login attempt is blocked the authsource throws a WRONGUSERPASS error.

Login Loop Detection

When configured, will stop the browser from looping indefinately when interacting with a broken/mis configured SP.

Configuration

    $config['authproc.idp'] = [
...
        51 => [
            'class' => 'loginloopdetection:LoopDetection',
            'secondsSinceLastSso' => 5,
            'loopsBeforeWarning' => 15,
            'logOnly' => false,
        ],
...

Exploring with Docker

You can explore these features with Docker.

docker network create --driver bridge ratelimit-net
# Ratelimit requires you to define a "store" to store rate limit data. These tests use memcached
docker run --network ratelimit-net -p 11211:11211 --name memcache-ratelimit -d memcached

docker run -d --name ssp-ratelimit \
   --network ratelimit-net \
   --mount type=bind,source="$(pwd)",target=/var/simplesamlphp/staging-modules/ratelimit,readonly \
  -e STAGINGCOMPOSERREPOS=ratelimit \
  -e COMPOSER_REQUIRE="cirrusidentity/simplesamlphp-module-ratelimit:@dev" \
  -e SSP_ENABLED_MODULES="ratelimit" \
  --mount type=bind,source="$(pwd)/tests/docker/metadata/",target=/var/simplesamlphp/metadata/,readonly \
  --mount type=bind,source="$(pwd)/tests/docker/authsources.php",target=/var/simplesamlphp/config/authsources.php,readonly \
  --mount type=bind,source="$(pwd)/tests/docker/config-override.php",target=/var/simplesamlphp/config/config-override.php,readonly \
  --mount type=bind,source="$(pwd)/tests/docker/cert/",target=/var/simplesamlphp/cert/,readonly \
  --mount type=bind,source="$(pwd)/tests/docker/public/looping-login.php",target=/var/simplesamlphp/public/looping-login.php,readonly \
   -p 443:443 cirrusid/simplesamlphp:v2.2.2

Then log in as admin:secret to https://ratelimit.local.stack-dev.cirrusidentity.com/simplesaml/ to confirm SSP is running.

Things to try

Blocking logins

To reach the admin test login endpoints you must first authenticate as an admin. Login to https://ratelimit.local.stack-dev.cirrusidentity.com/simplesaml/admin as admin:secret

The example-userpass authsource is configured with a low number of attempts for logins. Try logging in 3 or 4 times with the same username and wrong password and you should see log lines like

[Tue Dec 06 22:04:23.114923 2022] [php:notice] [pid 58] [client 172.18.0.1:59924] %date{M j H:i:s} simplesamlphp NOTICE STAT [c854ab328b] User 'testuser' login attempt blocked by SimpleSAML\\Module\\ratelimit\\Limiters\\UsernameLimiter

If you try varying usernames and the same password (a password stuffing attack) then after a few attempts you should see

User 'pass2' login attempt blocked by SimpleSAML\\Module\\ratelimit\\Limiters\\PasswordStuffingLimiter

Loop Detection

Visiting the looping-login page will issue a request as an SP to log in with a local IdP and print out the attributes. User member, password memberpass. If you add a loop query parameter you can mimic a misbehaving SP that continuously sends a user to the IdP to login. The IdP is configured (see saml20-idp-hosted.php) with loop detection and will display an error page after too many loops.

WARNING [c854ab328b] LoopDetection: Only 0 seconds since last SSO for this user from the SP 'https://ratelimit.local.stack-dev.cirrusidentity.com/simplesaml/module.php/saml/sp/metadata.php/loop-test' LoopDetectionCount 5

Development

Run phpcs to check code style

./vendor/bin/phpcs

Run phpunit to test

./vendor/bin/phpunit

You can auto correct some findings from phpcs. It is recommended you do this after stage your changes (or maybe even commit) since there is a non-trivial chance it will just mess up your code.

./vendor/bin/phpcbf

I always have trouble with psalm and it's cache, so I tend to run without caching

 ./vendor/bin/psalm --no-cache