README

Taskmaster is an object-oriented PHP library for running tasks in parallel.

A task can be written in a few lines of code and then executed in different environments, e.g. in a forked process, a new process, a thread or just synchronous in the same process without changing any code.

Therefore, this library can run without any extensions that aren't part of the PHP core, but it's also possible to use the advantages of advanced extensions such as pcntl or parallel if they are available.

It's even possible to proxy the creation of the environment through a proxy process that uses a different PHP binary/installation with different extensions. This allows using the advantages of the different strategies even in environments where this would not be possible otherwise, e.g. using forked processes on a webserver.

Tasks can communicate back to the main process during execution and handle results and errors gracefully.

This library is not supported on Windows due to a lack of essential features. The autodetect falls back to the sync worker on Windows, so running tasks should be possible, but running tasks in parallel does not work.

Installation
Basic Example
Writing tasks
Creating tasks
- Task factory
Defining workers
Running tasks
Task/worker groups
- Groups in task factories

Installation

composer require aternos/taskmaster

To use the ForkWorker you have to install the pcntl extension. For the ThreadWorker the parallel extension is required.

Basic Example

// Every task is its own class, the class should be autoloaded
class SleepTask extends \Aternos\Taskmaster\Task\Task {

    // The run method is called when the task is executed
    public function run(): void 
    {
        sleep(1);
    }
}

// The taskmaster object holds tasks and workers
$taskmaster = new \Aternos\Taskmaster\Taskmaster();

// Set up the workers automatically
$taskmaster->autoDetectWorkers(4);

// Add tasks to the taskmaster
for ($i = 0; $i < 8; $i++) {
    $taskmaster->runTask(new SleepTask());
}

// Wait for all tasks to finish and stop the taskmaster
$taskmaster->wait()->stop();

Writing tasks

A task is an instance of a class. When writing your own task class, it is recommended to extend the Task class, but implementing the TaskInterface is also possible.

A class must define a run function and has some optional functions such as error handlers.

Tasks are serialized and therefore must not contain any unserializable fields such as closures or resources. They can define those fields when the task is executed in the run function.

The `run()` function

The run function is called when the task is executed. It's the only required function for a task. It can return a value that is passed back to the main process and can be handled by defining a Task::handleResult(mixed $result) function in your task.

In all current workers, the input/output streams are connected to the main process, so you can use echo and STDERR to output something in your run() function at any time.

Call back to the main process

A task (usually) runs in a different process than the main process. The result and errors are communicated back to the main process, but it's also possible to call back to the main process during execution.

The Task class provides the Task::call() and Task::callAsync() functions to call a function in the main process. The Task::call() function blocks until the function is executed and the result is returned. The Task::callAsync() function returns a Promise that resolves when the function is executed and the result is returned. While it is theoretically possible to send multiple requests to the main process at the same time, the main process still has to process them synchronously and therefore the async calls have no benefit. It's only recommended to use the async calls if you want to do something else in the task while waiting for the result.

The first parameter of the Task::call() and Task::callAsync() functions is a Closure of the function that you want to call in the main process. The function has to be a public function of your task class. The second and following parameters are the parameters that are passed to the function in the main process as first and following arguments. The arguments have to be serializable.

Example:

class CallbackTask extends \Aternos\Taskmaster\Task\Task
{
    static protected int $current = 0;

    #[OnParent]
    public function getCurrent(): int
    {
        return static::$current++;
    }

    #[OnChild]
    public function run(): void
    {
        $current = $this->call($this->getCurrent(...));
        echo "I am task number $current\n";
    }
}

Child/parent attributes

As seen in the example above, it's possible to define functions that are executed in the main process OnParent, in the child process OnChild or in both OnBoth using attributes.

These attributes are optional (default is OnBoth) and for methods mostly used as a documentation for the developer to clearly show which methods are executed where. The only implemented restriction for methods is that functions marked with the OnChild attribute must not be called using the Task::call() or Task::callAsync() functions.

The attributes can also be used on properties:

Synchronized properties

Besides the usage for methods mentioned above, the attributes can also be used on properties to define where task properties are used and synchronized.

Properties marked with the OnParent attribute are only available in the main process and not serialized when running the task. They can contain unserializable values such as closures or resources.

Properties marked with the OnChild attribute are initially serialized and sent to the child process, so they can be set initially on the parent. After that, they are only available in the child process and never synchronized back to the parent. So the child process in the Task::run() function can set the values of those properties to something unserializable.

Properties marked with the OnBoth or no attribute are initially serialized and sent to the child process. They are synchronized back to the parent when Task::callAsync() or Task::call() is used to call a function in the main process. They are also synchronized back to the parent when the task is finished or (safely) errors with an exception. The synchronisation ONLY happens on those events, changes to the property are not immediately synchronized. The properties marked with this attribute have to be always serializable.

Example:

class SynchronizedFieldTask extends \Aternos\Taskmaster\Task\Task
{
    #[OnBoth] 
    protected int $counter = 0;

    #[OnBoth]
    public function increaseCounter(): void
    {
        $this->counter++;
    }

    #[OnChild]
    public function run(): null
    {
        for ($i = 0; $i < 3; $i++) {
            $this->increaseCounter();
            $this->call($this->increaseCounter(...));
        }
        return $this->counter;
    }
}

The result of this task is 6 because the counter property is synchronized and increased on both sides.

Serialization in other classes

The OnParent, OnChild and OnBoth attributes are only available in your Task class. If other objects are serialized but contain properties that should not be serialized, you can use the SerializationTrait in your class and then add the Serializable or NotSerializable attributes to your properties.

You can use the Serializable attribute to mark properties that should be serialized. When using only the Serializable attribute, all properties that are not marked with the Serializable attribute will be ignored.

You can use the NotSerializable attribute to mark properties that should not be serialized. When using only the NotSerializable attribute, all properties that are not marked with the NotSerializable attribute will be serialized.

When using both attributes, all properties must be marked with either the Serializable or NotSerializable attribute, otherwise an exception will be thrown.

Synchronous environment

In some cases special handling is required when the task is executed in a synchronous environment using the SyncWorker, e.g. you might not want to close file handles that are still used by other tasks. The Task::isSync() function can be used to check if the task is being executed synchronously.

Handling the result

The Task::handleResult() function is called when the task returns a value. It can be used to handle the result of the task. You can override this function to implement your own result handler. It is not required to define this function.

The first parameter is the result of the task or null if the task did not return a value. The default implementation in the Task class just stores the result in the task object for later access using the Task::getResult() function. If you override this function, you should call the parent function to store the result or store the result yourself.

You can also use the TaskPromise returned from the Taskmaster::runTask() function or obtainable from the task object using the Task::getPromise() function to handle the result. The TaskPromise is resolved with the return value of the Task::run() function. You can use the TaskPromise::then() function to handle the result. The first argument is the result, the second argument is the task object.

Example:

$taskmaster->runTask(new SleepTask())->then(function(mixed $result, TaskInterface $task) {
    echo "The task returned " . $result . PHP_EOL;
});

Timeout

You can define a timeout for a task using the Task::setTimeout(?float $timeout) function or by overriding the Task::getTimeout() function. 0 means no timeout, null means the default timeout is set by the taskmaster defined by Taskmaster::setDefaultTaskTimeout(float $timeout). The timeout is set in seconds and can be a float value down to microseconds.

If the task takes longer than the timeout, a TaskTimeoutException is thrown.

Timeouts are only used in asynchronous workers, with a SyncWorker the task is executed synchronously and therefore the timeout is not used.

Timeouts are not exact, they are evaluated in every update interval of the taskmaster. Therefore, the task can take a little longer than the timeout.

Handling errors

Critical errors

The Task::handleError() function is called when the task caused a fatal unrecoverable error. The first parameter is an Exception that is thrown by the task or by this library. You can override this function to implement your own error handler.

The three exception thrown by this library are the PhpFatalErrorException cause by a fatal PHP error, the WorkerFailedException that is thrown when the worker process exited unexpectedly and the TaskTimeoutException that is thrown when the task takes longer than the timeout.

PHP fatal errors can only be caught if they were caused in a separate process, e.g. when using the ForkWorker or the ProcessWorker. It's not recommended to rely on this.

If a worker fails and the task gets a WorkerFailedException, it is possible that this was not caused by the task itself and therefore a retry of the task might be possible. This should be limited to a few retries to prevent endless loops.

The TaskTimeoutException is thrown when the task takes longer than the timeout defined by Task::getTimeout() or the default defined by Taskmaster::setDefaultTaskTimeout().

The default error handler implementation in the Task class stores the error in the task object for later access using the Task::getError() function and writes the error message to STDERR. When overriding this function, you should call the parent function to store the error or store the error yourself.

You can also use the TaskPromise returned from the Taskmaster::runTask() function or obtainable from the task object using the Task::getPromise() function to handle the error. The TaskPromise is rejected with the error. You can use the TaskPromise::catch() function to handle the error. The first argument is the error, the second argument is the task object.

Example:

$taskmaster->runTask(new SleepTask())->catch(function(Exception $error, TaskInterface $task) {
    echo "The task failed: " . $error->getMessage() . PHP_EOL;
});

Uncritical errors

The Task::handleUncriticalError() function is called when the task caused an uncritical error, e.g. a PHP warning. You can override this function to implement your own error handler. The first parameter is a PhpError object that contains the error details. The function should return true if the error was handled or false (default) if the PHP error handler should continue (usually by logging/outputting the error).

The handleUncriticalError function is called in the same process as the task itself.

When executing tasks synchronously using the SyncWorker, no PHP error handler is defined to avoid conflicts with other error handler of the main process. Therefore, the handleUncriticalError function is not called in this case.

Creating tasks

A task object can simply be created by instancing the task class:

$task = new SleepTask();

And then added to the taskmaster:

$taskmaster->runTask($task);

You can add all your tasks at the beginning:

for ($i = 0; $i < 100; $i++) {
    $taskmaster->runTask(new SleepTask());
}

or wait for the taskmaster to finish some tasks and then add more to avoid holding all tasks in memory:

for ($i = 0; $i < 10; $i++) {
    for ($j = 0; $j < 10; $j++) {
        $taskmaster->runTask(new SleepTask());
    }
    $taskmaster->waitUntilAllTasksAreAssigned();
}

Task factory

The best way to dynamically create tasks when necessary is by creating a task factory, by extending the TaskFactory class or implementing the TaskFactoryInterface.

// Your own task factory extending the TaskFactory class
class SleepTaskFactory extends \Aternos\Taskmaster\Task\TaskFactory
{
    protected int $count = 0;

    public function createNextTask(?string $group): ?\Aternos\Taskmaster\Task\TaskInterface
    {
        if ($this->count++ < 100) {
            return new SleepTask();
        }
        
        // Stop creating tasks after 100 tasks
        return null;
    }
}

$taskmaster->addTaskFactory(new SleepTaskFactory());

You could use the promise returned from Task::getPromise() to also handle success and failure of tasks in your task factory as well.

You can also use the existing IteratorTaskFactory that creates tasks from an iterator.

// Create an iterator that iterates over all files in the current directory
$iterator = new \RecursiveIteratorIterator(new \RecursiveDirectoryIterator("."));

// Create the task factory using the iterator and a task class that gets the iterator value as constructor argument
// Note, that the SplFileInfo object that you get from a DirectoryIterator is not serializable and therefore cannot be 
// stored in a task property, but you can use any other values, e.g. the file path
$factory = new \Aternos\Taskmaster\Task\IteratorTaskFactory($iterator, FileTask::class);

$taskmaster->addTaskFactory($factory);

You can add multiple task factories to a taskmaster. The taskmaster will use the factories in the order they were added. If a factory returns null, the next factory is used.

Defining workers

A worker executes tasks. There are different workers available that execute tasks in different environments.

Available workers

Currently, the following workers are available:

You can also write your own worker by extending the existing workers or implementing the WorkerInterface.

Creating workers

A worker object can simply be created by instancing the worker class:

$worker = new \Aternos\Taskmaster\Environment\Sync\SyncWorker();

You can define custom options for the worker by creating a TaskmasterOptions object and passing it to the worker. If the options are not set, the default options from your Taskmaster instance are used.

$options = new \Aternos\Taskmaster\TaskmasterOptions();
$options->setBootstrap(__DIR__ . '/vendor/autoload.php');
$options->setPhpExecutable('/usr/bin/php');

$worker = new \Aternos\Taskmaster\Environment\Process\ProcessWorker();
$worker->setOptions($options);

Currently only the bootstrap file and the PHP executable can be set as options. Those options are only relevant for some workers, especially the ProcessWorker.

Proxy workers

It's possible to proxy the creation of the worker through a proxy process that uses a different PHP binary or environment, e.g. you can use a PHP CLI proxy process in a webserver environment to use the ForkWorker. One proxy can be used for multiple workers.

Currently, the only available proxy is the ProcessProxy that uses a new process opened using proc_open() to run the worker.

To use a proxy, create a new proxy object and pass it to the worker:

$proxy = new \Aternos\Taskmaster\Proxy\ProcessProxy();
$worker = new \Aternos\Taskmaster\Environment\Fork\ForkWorker();
$worker->setProxy($proxy);

You can also define TaskmasterOptions for the proxy process. If the options are not set, the default options from your Taskmaster instance are used.

$options = new \Aternos\Taskmaster\TaskmasterOptions();
$options->setBootstrap(__DIR__ . '/vendor/autoload.php');
$options->setPhpExecutable('/usr/bin/php');

$proxy = new \Aternos\Taskmaster\Proxy\ProcessProxy();
$proxy->setOptions($options);

Defining workers manually

Before running any tasks, you have to define the workers that should be used.

// Add a single worker
$taskmaster->addWorker(new \Aternos\Taskmaster\Environment\Sync\SyncWorker());

// Add a worker multiple times
$taskmaster->addWorkers(new \Aternos\Taskmaster\Environment\Process\ProcessWorker(), 4);

// Add multiple workers with the same proxy
$worker = new \Aternos\Taskmaster\Environment\Fork\ForkWorker();
$worker->setProxy(new \Aternos\Taskmaster\Proxy\ProcessProxy());
$taskmaster->addWorkers($worker, 8);

// Define/replace all workers at once
$taskmaster->setWorkers([
    new \Aternos\Taskmaster\Environment\Fork\ForkWorker(),
    new \Aternos\Taskmaster\Environment\Fork\ForkWorker(),
    new \Aternos\Taskmaster\Environment\Fork\ForkWorker(),
]);

Defining workers automatically

It's possible to detect the available workers and set them up automatically:

// create 4 automatically detected workers
$taskmaster->autoDetectWorkers(4);

This will use the ForkWorker if the pcntl extension is available, or the ProcessWorker if the proc_open() function is available and fall back to the SyncWorker otherwise.

The autoDetectWorkers() function also supports loading the worker configuration from environment variables.

Defining workers using environment variables

When the autoDetectWorkers() function is called, it also checks the following environment variables to create the worker configuration:

When using the autoDetectWorkers() function, it's possible to disable loading the worker configuration from environment variables by setting the second argument to false or to just disable loading the worker count by setting the third argument to false.

// Load count and workers from environment variables
$taskmaster->autoDetectWorkers(4);

// Load nothing from environment variables
$taskmaster->autoDetectWorkers(4, false);

// Load worker types from environment variables, but keep the worker count
$taskmaster->autoDetectWorkers(4, true, false);

Init tasks

You can define tasks that are executed on every worker instance before the first task is executed. This is helpful to run some initial setup or (in case of the ForkWorker) to clear some variables that are inherited from the parent process, e.g. database connections.

// init tasks are always provided by a task factory
$taskmaster->setDefaultInitTaskFactory(new InitTaskFactory());

// but taskmaster can create task factories automatically by cloning or instancing a task
$taskmaster->setDefaultInitTask(new InitTask());
$taskmaster->setDefaultInitTask(InitTask::class);

// you can also define a task factory for a specific worker
$worker->setInitTaskFactory(new InitTaskFactory());

Running tasks

After writing your tasks, creating them and defining the workers, you can start running the tasks. You don't have to explicitly start the taskmaster, just running the update loop through the wait functions or manually is enough. Workers and proxies are started when necessary.

Configuring the taskmaster

Besides configuring workers and proxies directly, you can also configure the default TaskmasterOptions on the taskmaster object. Those options are used for all workers and proxies that don't have their own options.

Bootstrap file

The bootstrap file is used to autoload classes in the worker process. This isn't used by every worker, e.g. the SyncWorker and the ForkWorker don't need this, but the ProcessWorker does.

$taskmaster->setBootstrap(__DIR__ . '/vendor/autoload.php');

If this is not set, Taskmaster tries to find the composer autoloader automatically.

PHP executable

The PHP executable is used to run the worker process. This is currently only used by the ProcessWorker and the ProcessProxy.

$taskmaster->setPhpExecutable('/usr/bin/php');

The default value for the PHP executable is simply php.

Waiting for tasks to finish

You can simply wait for all tasks to finish using the Taskmaster::wait() function:

$taskmaster->wait();

This function blocks until all tasks are finished and then stops the taskmaster. If you might want to add further tasks, you can also use the Taskmaster::waitUntilAllTasksAreAssigned() function to wait until all tasks are assigned to a worker and then add more tasks.

$taskmaster->waitUntilAllTasksAreAssigned();

This doesn't wait for all tasks to finish, but when all tasks are assigned to a worker, it's the best time to add more tasks to avoid any workers being idle.

You should still wait for all tasks to finish using Taskmaster::wait() before stopping the taskmaster.

Waiting and handling tasks

You can also use the Taskmaster::waitAndHandleTasks() function to handle tasks when they finish instead of waiting for all tasks to finish.

foreach ($taskmaster->waitAndHandleTasks() as $task) {
    if ($task->getError()) {
        echo "Task failed: " . $task->getError()->getMessage() . PHP_EOL;
    } else {
        echo "Task finished: " . $task->getResult() . PHP_EOL;
    }
}

The Taskmaster::waitAndHandleTasks() function returns a generator that yields tasks when they finish. You have to iterate over the generator to handle the tasks or the taskmaster will not continue to run.

Running the update loop manually

You can also run the update loop manually and do something else between the updates. The Taskmaster::update() function returns an array of all tasks that finished since the last update.

do {
    $finishedTasks = $taskmaster->update();
    // do something else
} while ($taskmaster->isRunning());

This is exactly the code of the Taskmaster::wait() function, but you can do something else between the updates.

Stopping the taskmaster

After you've waited for all tasks to finish, you should stop the taskmaster:

$taskmaster->stop();

Task/worker groups

For a more complex setup, you can group several workers together and then define tasks that only run on a certain group.

// create a group A with 4 fork workers
$workerA = new \Aternos\Taskmaster\Environment\Fork\ForkWorker();
$workerA->setGroup('A');
$taskmaster->addWorkers($workerA, 4);

// create a group B with 2 process workers
$workerB = new \Aternos\Taskmaster\Environment\Process\ProcessWorker();
$workerB->setGroup('B');
$taskmaster->addWorkers($workerB, 2);

// create tasks that only run on group A
for ($i = 0; $i < 10; $i++) {
    $taskA = new SleepTask();
    $taskA->setGroup('A');
    $taskmaster->runTask($taskA);
}

// create tasks that only run on group B
for ($i = 0; $i < 5; $i++) {
    $taskB = new FileTask();
    $taskB->setGroup('B');
    $taskmaster->runTask($taskB);
}

Groups in task factories

Task factories also support groups in two ways.

You can directly define, for which groups the task factory should be called by returning an array of groups from the TaskFactory::getGroups() function. You can return null if you want to create tasks for all groups or [null] in an array if you want to be called for tasks without a group.

And you get the group as a parameter in the TaskFactory::createNextTask(?string $group) function. The group parameter is null if the task factory is called for tasks without a group.

class SleepTaskFactory extends \Aternos\Taskmaster\Task\TaskFactory
{
    protected int $count = 0;
    
    public function getGroups() : ?array
    {
        return ['A', 'B'];
    }

    public function createNextTask(?string $group): ?\Aternos\Taskmaster\Task\TaskInterface
    {
        if ($this->count++ < 100) {
            return new SleepTask();
        }
        return null;
    }
}

aternos / taskmaster

Maintainers

Details

README

Installation

Basic Example

Writing tasks

The `run()` function

Call back to the main process

Child/parent attributes

Synchronized properties

Serialization in other classes

Synchronous environment

Handling the result

Timeout

Handling errors

Critical errors

Uncritical errors

Creating tasks

Task factory

Defining workers

Available workers

Creating workers

Proxy workers

Defining workers manually

Defining workers automatically

Defining workers using environment variables

Init tasks

Running tasks

Configuring the taskmaster

Bootstrap file

PHP executable

Waiting for tasks to finish

Waiting and handling tasks

Running the update loop manually

Stopping the taskmaster

Task/worker groups

Groups in task factories

aternos / taskmaster

Maintainers

Details

README

Installation

Basic Example

Writing tasks

The run() function

Call back to the main process

Child/parent attributes

Synchronized properties

Serialization in other classes

Synchronous environment

Handling the result

Timeout

Handling errors

Critical errors

Uncritical errors

Creating tasks

Task factory

Defining workers

Available workers

Creating workers

Proxy workers

Defining workers manually

Defining workers automatically

Defining workers using environment variables

Init tasks

Running tasks

Configuring the taskmaster

Bootstrap file

PHP executable

Waiting for tasks to finish

Waiting and handling tasks

Running the update loop manually

Stopping the taskmaster

Task/worker groups

Groups in task factories

The `run()` function